Trang chủ » Sản Phẩm » Intelligent Digital Security » NVR Hardware Platform » Mobile NVR » NViS 2310

Bộ ghi hình NVR phương tiện di động Nexcom NViS 2310

Mã sản phẩm: NViS 2310

Mobile NVR Surveillance Fanless System with Intel® Atom™ E3845

Datasheet(PDF)
Chia sẻ:

Bộ ghi hình NVR phương tiện di động Nexcom NViS 2310

NViS 2310 features based on Intel® Core™ quad core processor E3845 (1.91GHz),Its CPU performance gives the users the ability to adapt to what they need in any Surveillance applications. Its Intel® HD graphics engine allows users to fully take advantage of NViS 2310 providing a wide variety of display I/O configurations of 2 different video outputs (VGA, DP). NViS 2310 is not only suitable for video surveillance application, It allows NViS 2310 to comply with stringent MIL-STD-810G military standard in rugged, fanless and compact mechanism. NViS 2310 providescomplete communication capability between automotive and computer with built-in CAN BUS 2.0B interface. Optional OBDII interface (J1939/J1908) is also available for vehicle diagnostics. NViS 2310 features rich PAN, WLAN and WWAN wireless connectivity.

With dual SIM cards support, NViS 2310 allows three SIM cards backup each other for a better connectivity quality by software. In addition, three SIM cards and dual WWAN modules architecture can increase the bandwidth for a faster data transmission speed. Not only data transmission, NViS 2310 also supports two-way voice communication. Equipped with intelligent power management, NViS 2310 can be waked on by ignition, RTC timer or SMS message remotely. By integrating the variety of I/O ports and 4 x mini-PCIe sockets expansibility, NViS 2310 keeps the flexibility to meet the demand for different telematics applications, such as infotainment, fleet management, dispatching system and video surveillance.

CPU Intel® Atom™ processor quad core E3845, 1.91GHz
Memory 1 x 204-pin DDR3L SO-DIMM socket support 1066MHz/1333MHz up to 8GB (default built-in 4GB)
Storage 1 x 2.5″ SSD/HDD SATA 2.0 (externally accessible, optional lockable storage available)

1 x CFast (externally accessible)

Function 1 x Default U-blox UBX-G6010 GPS module (50-channel and GALIELO) or optional modules with Dead Reckoning or GLONASS support

Built-in G-sensor

Expansions 1 x Full size mini-PCIe socket (USB 2.0)

1 x Full size mini-PCIe socket (USB 2.0)

1 x Full size mini-PCIe socket (USB 2.0 + PCIe)

1 x Half size mini-PCIe socket (USB 2.0 + PCIe)

Software Support Windows 8, WES8

Window 7, WES7

Linux kernel 3.X

I/O Interface-Front 4 x LED for power, storage, WWAN, WLAN

2 x Externally accessible SIM card socket (selectable)

1 x Phone jack 3.5mm for 1 x MIC-in

1 x Phone jack 3.5mm for 1 x Line-out

1 x Externally accessible 2.5″ SATA 2.0 SSD/HDD tray

1 x Externally accessible CFast card socket with cover

1 x Event button (trigger type)

1 x Reset button

1 x Type A USB 3.0 compliant host, supporting system boot up

4 x Antenna hole for WWAN/WLAN/BT

I/O Interface-Rear 1 x 9 ~ 36VDC input with Ignition

2 x Type A USB 2.0 compliant host, supporting system boot up

2 x RJ45 10/100/1000 Fast Ethernet with LED

1 x Phone jack 3.5mm for 1 x MIC-in

1 x Phone jack 3.5mm for 1 x Line-out

1 x DB-15 VGA, resolution up to 2560 x 1600 @60Hz

1 x DP port, resolution up to 2560 x 1600 @60H

1 x Antenna hole for GPS

2 x DB-9 RS232 (RI/5V/12V selectable)

1 x DB-9 RS422/485

1 x DB-9 for CAN 2.0B (optional CAN Bus 2.0B mini-PCIe card)

2 x MCU-DI and 2 x MCU-DO

1 x 16-pin terminal block

1 x CAN Bus 2.0B (on board)

1 x Optional OBDII module (ASE J1939 or J1708)

8 x GPIO (Programmable Digital Input or optional isolation)
(Digital Input)
Input voltage (internal type): 5VDC TTL (default)
Input voltage (source type): 3 ~ 12VDC (Programmable Digital Output or optional isolation)
(Digital Output)
Digital output (sink type): 5VDC TTL (default), max. current: 20mA
Digital output (source type): 3 ~ 24VDC, max. current: 150mA

1 x 12VDC output (2A), SM Bus

Power Management Selectable boot-up & shut-down voltage for low power protection by software

Setting 8-level power on/off delay time by software

Status of ignition and low voltage can be detected by software

Support S3/S4 suspend mode

Dimensions 260mm (W) x 176mm (D) x 50mm (H) (10.24″ x 6.93″ x 1.97″)

Weight: 2.1kg

Environment Operating temperature: Ambient with air -30°C ~ 70°C (SSD)

Storage temperature: -35°C ~ 85°C

Relative humidity: 10% ~ 90% (non-condensing)

Vibration (random): 1g@5 ~ 500Hz (in operation, HDD), 2g@5 ~ 500Hz (in operation, SSD)

Vibration (SSD/HDD):
Operating: MIL-STD-810G, Method 514.6, Category 4, common carrier US highway truck vibration exposure

Storage: MIL-STD-810G, Method 514.6, Category 24, minimum integrity test

Shock (SSD/HDD):
Operating: MIL-STD-810G, Method 516.6, Procedure I, functional shock=20g
Non-operating: MIL-STD-810G, Method 516.6, Procedure V, crash hazard shocktest=75g

Certifications CE approval

FCC Class B

E13 Mark

NViS 2310 (P/N: 10C00231000X0)

Manual
Date Description Version OS Download
2015-02-03 User Manual Windows 9.36MB