Trang chủ » Sản Phẩm » Mobile Computing Solutions » Embedded Add-On Module/Card » VIOB-CAN-03

Module CAN Bus2.0B, SAE J1708, SAE J1939 Nexcom VIOB-CAN-03

Mã sản phẩm: VIOB-CAN-03

1 x SAE J1708 or J1939, 1 x CAN 2.0B or SAE J1939 Module

Datasheet(PDF)
Chia sẻ:

Module CAN Bus2.0B, SAE J1708, SAE J1939 Nexcom VIOB-CAN-03

VIOX-CAN01/VTK-CAN-03 module is a one-port high-speed CAN interface for UART with proprietary form factor design to release a mini-PCIe slot for additional application. It is easy and quick installation on device to communicate with the vehicle ECU. It complies with standard CAN 2.0B with bit rate up to 1Mbit/s and followed the corresponded protocol. To satisfy server vehicles e nvironments, VIOX-CAN01/VTK-CAN-03 module can be operated on a wide-range operating temperature from -40°C to 85°C. Besides, it is built-in ESD level ±8KV/15KV (contact/air) according to IEC 61000-4-2 to protect the system.

Form Factor Proprietary
I/O Connector Dual 2 x 5-pin internal header
Function VIOX-CAN01
– 1 x SAE J1708 or SAE J1939 protocol supported
VTK-CAN-03
– 1 x CAN 2.0B or SAE J939 protocol supported (selection by switch)
Dimensions 50mm (L) x 28mm (W) (1.96” x 1.1”)

Weight: 8g

Environment Operating temperatures: -40°C~85°C

Storage temperatures: -40°C~90°C

Related humidity (with system chassis): 5%~90%

Electrical Protection IEC 61000-4-2 electrostatic discharge (ESD): ±8KV/15KV (contact/air)
Software Driver and SDK

VIOX-CAN01 (P/N: 10VKOBDII00X0)

Be used for VTC 1010/VTC 6210/VTC 72XX/VMC series/MVS series (by request). 1 x SAE J1708 or SAE J1939 module, proprietary form factor, UART interface

VTK-CAN-03 (P/N: 10VK00CAN01X0)

Be used for VTC 1010/VTC 6210/VTC 72XX/VMC series/MVS series (by request). 1 x CAN 2.0B or SAE J1939 module, proprietary form factor, UART interface