Trang chủ » Sản Phẩm » Mobile Computing Solutions » Embedded Add-On Module/Card » VIOB-CAN-06

Module SAE J1939 Nexcom VIOB-CAN-06

Mã sản phẩm: VIOB-CAN-06

SAE J1939 Module

Chia sẻ:

Module SAE J1939 Nexcom VIOB-CAN-06

VTK-CAN-06 module is a one-port high-speed CAN bus interface for USB. With mini-PCIe form factor design and a built-in 4-pin wafer by USB signal, it is easy and quick installation on any device to communicate with the vehicle ECU. It complies with standard CAN 2.0A and CAN 2.0B according to ISO 11898-1, ISO 11898-2 with bit rate up to 1Mbit/s and followed by SAE J1939/ISO 15765-4 protocol. To satisfy server vehicles environments, VTK-CAN-06 can be operated on a wide-range operating temarature from -40°C to 85°C. Besides, it is built-in electrical isolation of 2.25KV and ESD level ± 8KV /15KV(contact/air) according to IEC 61000-4-2 to protect the system.

Form Factor mini-PCIe form factor
PC Interface USB 2.0 (VCP, baud rate default 9.6kbps)
I/O Connector 4-Pin wafer connector (USB 2.0 I/F)

DB9 connector for CAN 2.0A/B (w/ an external cable)

SAE J1939/ISO 15765-4 Fully compatible with the ELM327 AT command set

UART interface (baud rates from 38 bps to 10 Mbps)

Support for SAE J1939/ISO 15765-4 OBD/OBDII protocol

Automatic protocol detection algorithm

Dimension 51mm (L) x 30mm (W) (2.01″ x 1.18″)

Weight: 13g

Environment Operating Temperatures: -40 ~ 85°C

Storage Temperatures: -40 ~ 90°C

Related Humidity (with system chassis): 5% ~ 90%

Electrical Protection IEC 61000-4-2 Electrostatic Discharge (ESD): ± 8KV /15KV(contact/air)

Isolation protection : 2.25KV

VCP Driver PL2303HXC

Windows XP/7/8/10, Android 3.2 (above)

Linux kernel 3.x (above)

VTK-CAN-06 (P/N: 10VK00CAN07X0)

1 x CAN 2.0A/B with SAE J1939, full-size mini-PCIe form factor, USB 2.0 interface, DB9 cable