Trang chủ » Sản Phẩm » Mobile Computing Solutions » Vehicle Mount Computer » Fleet Management » VMC 1100

Máy tính công nghiệp Vehicle màn cảm ứng 7 inch (Fleet Management) Nexcom VMC 1100

Mã sản phẩm: VMC 1100

7″ All-In-One Vehicle Computer with Touch Screen and Multifunctional Tracker

Chia sẻ:

Máy tính công nghiệp Vehicle màn cảm ứng 7 inch (Fleet Management) Nexcom VMC 1100

VMC 1100, a new generation 7-inch vehicle mount computer with dual core Intel Atom® processor, is designed for transportation and harbor applications requiring real-time vehicle tracking and job-dispatching. For real-time communication between driver and central control room, VMC 1100 provides the capability of wireless connection from GPS, WLAN to WWAN. To get more data from accessories, it offers RS-232, RS-485, USB 2.0, GPIO, and LAN connection. Dual CANBus 2.0B ( OBDII and J1939 protocol ), analog input and PWM are able to help to receive car status more quickly and correctly. Due to the unique features above, VMC 1100 is perfect to used in harbor application from container truck, forklift, container stacker….

General Cooling System: Fanless

Enclosure: Plastic PC + ABS with aluminum die casting heatsink

Mounting: Support VESA 75, stand mounting

Four SMA Type antenna connectors of BT/Wi-Fi/WWAN/GPS

Power Input: 9 ~ 36VDC input with Ignition

Power Consumption: 26W

Ingress Protection: Front panel IP54

Dimension: 213mm (W) x 145mm (H) x 50mm (D)(8.3″ x 5.7″ x 1.9″)

N.W: 1.3Kg
G.W: 1.6Kg

LCD Panel 7-inch TFT LCD Panel with LED Backlight

800 x 480 pixels (WVGA)

Brightness: 400 cd/m² (typical)

Contrast ratio: 600:1 (typical)

Touch Screen Sensor 4-wire resistant touch

Anti-glare coating surface

Transmission rate: 78 ± 3%

CPU & Chipset Intel® Atom™ Dual Core E3825 1.33GHz
Memory One 204-pin DDR3L 1600MHz SO-DIMM slot (up to 4GB)
– Default 2GB
Expandable Storage 1 x SATAIII SATA DOM Slot (available option 16GB / 32GB / 64GB)
Expansion 1 x Half mini-PCIe socket (PCIe + USB) for WLAN option

1 x mini-PCIe socket ((USB + UART) for WWAN option)

1 x External module for OBD/RFID module option(UART + USB)

I/O Interface-Front F1 ~ F5 functions key

Light Sensor

Internal Mic-in

2 x Built-in 2W speakers

3 x LED indicators (Power mode, Storage and WWAN status)

I/O Interface-Lateral Right side
– 1 x Micro SD card socket
– 1 x SIM card socket
– 1 x USB 3.0 host type A connector
– 1 x Mic-in, Line-out
Left side
– 1 x Power button
– 1 x System reset button
– Volume up/down or Brightness up/dow
I/O Interface-Rear 1 x 5-pin Circular connector for Power/Ignition input

1 x RJ45 for LAN

1 x RJ45 for Full RS-232 with 0V/5V/12V power supply (0.5A)

1 x DB9 (Male) for
– RX/TX or RS-485
– 2 x CAN Bus 2.0
1 x DB15 (Female) for
– GPS dead reckoning interface (optional)
– 2 x PWM, 2 x Analog Input, 2 x GPO, 2 x GPI
Analog Input requirement for Voltages are measured
Channel: 8
Voltage range: 0 ~ 38V
Resolution: 8 bit
Analog Input requirement for Frequency, Speed
Square wave
Frequency signal offset voltage range: 0 ~ 15VDC
Protection: +/- 500V spike
Frequency signal duty cycle range: 10% ~ 90%

Communication Module 1 x u-blox NEO-M8N module
(support GPS/Gloness/QZSS/Galileo/Beidou)
1 x WLAN or Bluetooth module for optional

1 x WWAN module for optional

Power Management Selectable boot-up & shut-down voltage for low power protection

HW design ready for 8-level delay time on/off at user’s self configuration

Power on/off ignition, software detectable

Support S3 and S4 suspend mode; wake on RTC and SMS

Operating System Windows 10

Windows 8 Professional, WES8

Windows 7, WES7

Linux Fedora (kernel V3.2.0)

Environment Operating temperatures: Ambient with air -20°C to 60°C

Storage temperatures: -30°C to 80°C

Relative humidity: 10% to 95% (non-condensing)

Vibration (random): 3g @5 ~ 500Hz

Operating: MIL-STD-810G, 514.6 Procedure 1, Category 4
Storage: MIL-STD-810G, 514.6 Procedure 1, Category 24

Operating: MIL-STD-810G, Method 516.6, Procedure I, trucks and semi-trailers=20g
Crash hazard: MIL-STD-810G, Method 516.6, Procedure V, ground equipment=75g

Power Design & Protection Load dump and inductive load protection

Cold cranking protection

Transient voltage protection

Electrostatic discharge protection

Standards/Certifications EMC
– CE, FCC class B, E-Mark
– SAE J1113
– SAE J1455
– ISO 7637-2

– EN 60950-1 LVD

VMC 1100 (P/N: 10VC0110000X0)
7″ All-In-One Vehicle Computer with Touch Screen and Multifunctional Tracker and Intel® Atom™ Dual Core E3825 1.33GHz processor with 2GB DDR3L, GPS module and GPS antenna

Bundle Accessories
External Power cable (13cm)
Driver CD

Date Description Version OS Download
2019-07-19 CE Windows 0.18MB
2019-07-19 Emark Windows 0.11MB
2019-07-19 FCC Windows 0.19MB
Date Description Version OS Download
2017-05-15 Audio Windows 171.4MB
2017-05-15 Chipset Windows 7 191.93MB
2017-05-15 GPS Windows 11.97MB
2017-05-15 Graphics Windows 245.66MB
2017-05-15 Network Adapter Windows 54.47MB
2017-03-02 SDK Windows 1.17MB
2017-05-15 Touch Panel Windows 11.51MB
2017-05-15 WLAN + Bluetooth Driver – QCOM ZQ802XRACB Windows 57.65MB
Manual (Please Contact Sales)
Date Description Version OS Download
2017-07-03 User Manual
(Datasheet Only)