Trang chủ » Sản Phẩm » Mobile Computing Solutions » Embedded Add-On Module/Card » VTK-RELAY

Module Relay Nexcom VTK-RELAY

Mã sản phẩm: VTK-RELAY

Super Slim and Ruggedized Vehicle Relay Module

Datasheet(PDF)
Chia sẻ:
Module Relay Nexcom VTK-RELAY

VTK-RELAY is a super slim, ruggedized RELAY module. It is remotely controlled through an on board MCU and transmitted via RS-232 or USB 2.0 communication. With 4 x relay output, 4 x DI, 4 x DO, 1 x analog input, and 1 x frequency input for customer easily to setup vehicle system. It allows to comply with stringent MIL-STD-810G military standard in rugged, compact mechanism. Because of the super slim design, it is especially for the vehicles with limited space to control the system, but without compromising with its space to scarify its features. VTK-RELAY contains no DIP switches, by merely issuing a command from the vehicle computer, you can change RELAY/DI/DO setting to reach your application.

Relay Output Channel: 4 channels

Type: Form C

Connector: 3 x plug-in terminal blocks

Contact current rating: 10A @12VDC/5A @24VDC

Digital Input Channel: 4 channels

Sensor type: wet contact (default)/dry contact

I/O mode: DI

Wet contact: 9 to 36V, 12V @ 1.1mA/24V @ 2.2mA

Dry contact: external 0 to 36V

Wet or dry contact should be selected by SW utility

Digital Output Channel: 4 channels

Sensor type: wet contact (default)/dry contact

I/O mode: DO

Wet contact: 9 to 36V, 9V @13.2mA/12V @17.6mA/24V @25.29 mA/ 36V @52.7mA

Dry contact: external 0 to 36V

Wet or dry contact should be selected by SW utility

Analog Input Channel: 1 channel

Resolution: 10 bits

I/O mode: voltage/current input

Input range: 0 to 36V, 0 to 3A

Frequency Input Channel: 1 channel

I/O mode: frequency (PWM) input

Input frequency range: 2Hz to 6KHz

Power Requirements Input voltage: 9 to 36 VDC

Input current: 70mA @12 VDC

I/O Interface-Relay Side 4 x Relay’s 3 plug-in terminal blocks for N.O./COM/N.C.

4 x LED indicator for activated relays 1 to 4

I/O Interface-IO Side 1 x DB9 for RS-232

1 x Type A USB 2.0

1 x DC input 9~36V (3 plug-in terminal block for VIN/IGN/GND)

I/O Interface-COM/USB Side 1 x 10 plug-in terminal blocks for 4 x DI/4 x DO/ISO PW/ISO GND

1 x 4 plug-in terminal blocks for Analog Input/Frequency Input/ISO GND

Operating System Windows driver

Linux (by request)

Dimensions 124mm (W) x 126mm (D) x 24mm (H) (4.88” x 4.96” x 0.94”)

Weight: 0.42kg (0.9lbs)

Environment Temperature
– Operating temperatures: -40°C to 85°C
– Storage temperatures: -45°C to 85°C
– Damp heat test per EN60068-2-30

Humidity
– IEC60068-2-3, damp heat steady state test, 40C, 95%, 48hrs

Vibration
– IEC 60068-2-64, 2G
– Operating: MIL-STD-810G, 514.6C Procedure 1, Category 4
– Storage: MIL-STD-810G, 514.6E Procedure 1, Category 24

Shock
– MIL-STD-810G, 516.6 Procedure I, trucks and semi-trailers=40g
– Crash hazard: Procedure V, ground equipment=75g

Certifications (compatible) CE

FCC Class B

VTK-RELAY-01 (P/N: TBD)